招聘职位列表-湘湖就业与人才服务网

部门：人事部|人数：10人|专业：|地点：长沙经济技术开发区东五路75号 (邮编：410006)|浏览：494
投递简历

岗位职责：
- According to product request to responsible for the production line planning and process procedure set up (as: lay out of line, process route so on);
- 根据产品要求，负责生产线的规划和工艺流程的制定(如：产线的平面布置，工艺路线等)；

- According to product request to Responsible for fixture design and investment;
- 根据产品的要求负责工装的设计与投资；

- Edit PFMEA, process flowchart, control plan, and WI of process document so on. And organization carry out these process document in production line;
- 负责编制FEMA、工艺流程图、控制计划及操作指导等工艺文件，并组织在生产车间实施；

- Responsible for process improvement (as: OEE, productivity, PPM, CT, machine capability and production capacity);
- 负责工艺优化，如OEE、生产力、PPM、节拍时间、提升设备能力及产能；

- Analysis, study, test, implement and improve manufacturing processes focusing on current quality requirements and cost reduction objectives to reduce scrap rate and operators;
- 以当前质量需求及节约成本目标为中心，分析、学习、测试、实施并改进生产流程，以降低报废、减少人员等；

- Responsible for introduce new process from lead plant and apply to local plant;
- 负责从领导工厂引进最新的生产工艺并运用到本工厂；

- Participate in Failure parts and customer complaints analysis, and take effective action to solving problems with process correlative topic;
- 参与缺陷件与客户投诉的分析，并采取有效的措施解决与工艺相关的问题；

- Train and instruct the adjuster to adjust parameters and make maintenance for the key machine;
- 培训和指导调整工进行关键工艺设备的参数调整和日常维护；

- Support to prepare for sample manufacturing;
- 协助准备生产样件；

- Participate in the new project plan, and provide valuable planning on personnel, workplace and logistics.
- 参与新项目规划，并在人员、场地和物流等方面提出合理的规划。

任职要求：
- Bachelor degree or above in Mechanical Engineering related;
- 机械工程相关专业本科或以上学历；

- Good teamwork and problem-solving skills;
- 良好的团队合作和解决问题的能力；

- Good English communication in writing and speaking.
- 良好的英语听说读写能力。

部门：人事部|人数：10人|专业：|地点：长沙经济技术开发区东五路75号 (邮编：410006)|浏览：448
投递简历

岗位职责：
- According to new project plan, implement activities of part development related with supplier, ensure part released in time;
- 根据项目计划，实施供应商相关产品开发活动，确保按项目计划完成产品放行；

- Based on part specification, handle supplier responsible complain, and feedback to related department;
- 基于零件规范，处理供应商零件相关投诉，并反馈给相关部门；

- Receive supplier complain information from related departments, based 8D method, take internal actions in plant to avoid further quality risk to production;
- 从相关部门获得供应商相关的质量投诉信息，根据8D方法，在内部采取措施，避免不良零件对生产产生进一步质量影响；

- Push supplier analysis root cause, define & implement corrective actions, then assessment report from supplier, to ensure root cause is defined correctly, corrective actions are implemented, avoid failure happen again;
- 推动供应商分析失效原因并定义实施改进措施，然后评估供应商的报告，确保失效根本原因清楚定义，以及改进措施的实施并起到预期效果，避免失效再次发生；

- Feedback status of complain internal, share lesson learn with different plants & suppliers if necessary;
- 在内部反馈投诉的状况，并在必要时共享经验教训给不同的工厂及供应商；

- According to result of part release and related specification, define & maintain inspection plan in SAP in time;
- 根据零件放行结果和相关规范，及时在SAP中定义并维护进料检验计划；

- Keep monitor supplier performance, take continue improvement actions, to achieved defined supplier quality target;
- 持续监控供应商质量表现，采取持续改进措施，以达成约定的供应商质量目标；

- Support customer & third part visits/audits in SGCC for supplier topics;
- 支持客户/第三方机构审核中关于供应商相关的事项；

- Others tasks related with supplier quality management.
- 其它和供应商质量管理相关的工作。

任职要求：
- Bachelor degree,major in microelectronics, communication and electronic engineering;
- 全日制本科学历，微电子、通信、电子工程专业；

- At least 3 years’ experience in Automotive electronics and PCBA ;
- 至少3年汽车电子和PCBA经验；

- Know the manufacturing process circuit principle of PCBA;
- 了解PCBA的生产工艺和电路原理；

- Relevant experience of test and failure analysis of PCBA (in automotive industry);
- 具PCBA失效分析及检测相关经验；

- Relevant experience of supplier quality management;
- 有供应商质量管理经验；

- Know 8D and problem solving method;
- 了解8D，并能运用8D方法解决质量问题；

- Good communication skill;
- 良好的沟通技能；

- Good command of English in reading, writing, listening and speaking.
- 良好的英语听、说、读、写能力。

部门：人事部|人数：10人|专业：|地点：长沙经济技术开发区东五路75号 (邮编：410006)|浏览：478
投递简历

岗位职责：
- According to new project plan, implement activities of part development related with supplier, ensure part released in time;
- 根据项目计划，实施供应商相关产品开发活动，确保按项目计划完成产品放行；

- Based on part specification, handle supplier responsible complain, and feedback to related department;
- 基于零件规范，处理供应商零件相关投诉，并反馈给相关部门；

- Receive supplier complain information from related departments, based 8D method, take internal actions in plant to avoid further quality risk to production;
- 从相关部门获得供应商相关的质量投诉信息，根据8D方法，在内部采取措施，避免不良零件对生产产生进一步质量影响；

- Push supplier analysis root cause, define &implement corrective actions, then assessment report from supplier, to ensure root cause is defined correctly,corrective actions are implemented, avoid failure happen again;
- 推动供应商分析失效原因并定义实施改进措施，然后评估供应商的报告，确保失效根本原因清楚定义，以及改进措施的实施并起到预期效果，避免失效再次发生；

- Feed back status of complain internal, share lesson learn with different plants &suppliers if necessary;
- 在内部反馈投诉的状况，并在必要时共享经验教训给不同的工厂及供应商；

- According to result of part release and related specification, define & maintain inspection plan in SAP in time;
- 根据零件放行结果和相关规范，及时在SAP中定义并维护进料检验计划；

- Keep monitor supplier performance, take continue improvement actions, to achieved defined supplier quality target;
- 持续监控供应商质量表现，采取持续改进措施，以达成约定的供应商质量目标；

- Support customer & third part visits/audits in SGCC for supplier topics;
- 支持客户/第三方机构审核中关于供应商相关的事项；

- Others tasks related with supplier quality management.
- 其它和供应商质量管理相关的工作。

任职要求：
- Bachelor degree,major in microelectronics, communication and electronic engineering;
- 全日制本科学历，微电子、通信、电子工程专业；

- At least 3 years’ experience in Automotive electronics and PCBA ;
- 至少3年汽车电子和PCBA经验；

- Know the manufacturing process circuit principle of PCBA;
- 了解PCBA的生产工艺和电路原理；

- Relevant experience of test and failure analysis of PCBA (in automotive industry);
- 具PCBA失效分析及检测相关经验；

- Relevant experience of supplier quality management;
- 有供应商质量管理经验；

- Know 8D and problem solving method;
- 了解8D，并能运用8D方法解决质量问题；

- Good communication skill;
- 良好的沟通技能；

- Good command of English in reading, writing, listening and speaking.
- 良好的英语听、说、读、写能力。

部门：人事部|人数：10人|专业：|地点：长沙经济技术开发区东五路75号 (邮编：410006)|浏览：527
投递简历

岗位职责：
- Apply 8D methods in SGCN (training, reminding, evaluation and reporting) ;
- 应用8D方法,如培训,提醒, 评估, 汇报；

- Apply SPC &MSA in SGCN (training , implantation and monitoring) ;
- 应用SPC &MSA, 如培训,推行, 监控；

- Apply and coordinate PS method;
- 应用和协调问题解决（PS）方法；

- Act as quality interface between SGCN and SG global;
- 负责SGCN和全球的质量接口；

- Perform process Audit according to plan;
- 按计划执行过程审核；

- Support for internal / external audit and methodology related to data analysis for other functions;
- 支持内、外部审核以及对其它功能模块的数据分析方法；

- Handle and coordinate, follow up block parts which belongs to QMM responsibility (except for warranty ).
- 处理协调和跟踪封存品。

任职要求：
- Bachelor or above;
- 本科及以上；

- Three years working experience in mechanical/electrical industry;
- 三年机械/电气工业工作经验；

- SPC/MSA/PS(8D,6sigma等)knowledge;
- SPC/MSA/PS(8D,6西格玛等)知识；

- Quality system knowledge ( e.g. VDA6.3,IATF16949…);
- 质量体系知识；

- Good logic on cause-effect relationship;
- 好的因果关系逻辑判断；

- Work well with MS office;
- 熟练使用MS office；

- Good command of English.
- 英语良好。

部门：人事部|人数：10人|专业：|地点：长沙经济技术开发区东五路75号 (邮编：410006)|浏览：449
投递简历

岗位职责：

- Ensure running and optimization of related process, continuously improve jigs and fixtures of related process and instruct maintenance staff to maintain the equipment; Handing problems effecting normal production as equipment malfunction, fixture repair, spare parts application etc;

- 保证相关工艺的运行及优化，持续改进相关工艺的设备工装，并指导维修人员进行相关工艺设备的维护；处理影响正常生产的相关问题，如设备停机，工装修复，备件申领等；

- Instruct mass production process as how to implement process as how to implement process documents to ensure product quality stability; Analyze and solve workshop quality problems; Apply professional tools as SPC, FMEA to analyze and control process;

- 批量生产时指导生产过程，如何执行工艺文件以保证稳定的产品质量；现场质量问题的分析和解决；运用SPC，FMEA等专业工具进行过程分析及控制；

- Take part in issuing work instruction and set up instruction for related process. Support analyze and improve of related process, new product trial run and fixture trail run.

- 参与制订相关工艺过程的作业指导书及换型指导书。协助进行相关工艺的分析和改进，以及新产品调试和工装调试。

任职要求：
- Bachelor degree in electrical, mechanical and electromagnetics engineering；
- 电气、机械、电磁、力学相关专业本科学历（或同等学历）；

- Ability to communicate in English;

- 能用英语沟通；

- MS-Office, wide-spread technical basic knowledge;

- MS-Office,通用技能基础知识；

- FMEA, Control plan, CPK, CMK, MSA, WS project.
-FMEA，控制计划，CPK，CMK，MSA，WS项目。

部门：人事部|人数：10人|专业：|地点：长沙经济技术开发区东五路75号 (邮编：410006)|浏览：531
投递简历

岗位职责：
- Supplier sourcing, evaluation and development for direct materials;
- 产品直接材料的供应商选择, 评估和开发；

- RFQ, validation and comparison for new parts based on panel + bidders list;
- 基于认可供应商清单进行寻价及报价分析和比较；

- New parts or new supplier launch management;
- 新零件或者新供应商爬坡措施；

- Technical discussion and price negotiation with supplier for new project to meet target cost;
- 与供应商进行新零件的技术会谈和价格谈判, 达到项目的目标成本；

- Purchasing project management for new platform and application project;
- 应用项目和平台项目采购零件的项目采购管理；

- RPP(cost saving) and ECR(engineer change) handling;
- 负责采购零件的成本降低计划和采购有关的工程更改管理；

- Sample and tool ordering, SAP Data setting and maintenance;
- 样品和模具定单, SAP的采购数据设置和维护；

- Processing project topics and other tasks assigned by supervisor.
- 处理项目的相关议题以及主管分配的其他工作任务。

任职要求：
- Bachelor or above;
- 本科及以上学历；

- 2 years or above working experience in automotive industry in purchasing area;
- 2年及以上汽车行业采购经验；

- Middle level for project management and value stream concept;
- 对于项目管理和价值流概念有一定了解；

- knowledge of supplier source, RFQ & validation, supplier evaluation;
- 具备供应商选择, 报价及分析, 供应商评估的能力；

- Basic know-how for motor components manufacturing process;
- 对电机零部件的生产工艺有了解；

- Integrity & honesty personality, self-dignified;
- 廉洁, 诚实, 自尊自重；

- Good command of English in reading, writing, listening and speaking.
- 良好的英语听、说、读、写能力。

部门：人事部|人数：10人|专业：|地点：长沙经济技术开发区东五路75号 (邮编：410006)|浏览：400
投递简历

岗位职责：
- According to new product request to responsible for the feasibility evaluation and investment of machine and fixture ,and organization installation, debugging and accept for production line equipment;
- 根据新产品的要求，负责相关的设备、工装方面的可行性评估及投资并组织协调生产线设备的安装和调试与验收；

- Improvement current fixture design concept, and instruct machines maintenance;
- 改进工装的现有设计方案，指导设备的维护；

- Responsible for fixture design for new platform product;
- 负责新产品导入、设计工装夹具；

- Edit PFMEA, process flowchart, control plan, and WI of process document so on. And organization carry out these process document in production line;
- 负责编制FEMA、工艺流程图、控制计划及操作指导等工艺文件，并组织在生产车间实施；

- Responsible for process improvement (as: OEE, productivity, PPM, CT, machine capability and production capacity);
- 负责工艺优化，如OEE、生产力、PPM、节拍时间、提升设备能力及产能；

- Analysis, study, test, implement and improve manufacturing processes focusing on current quality requirements and cost reduction objectives. To reduce scrap rate and operators;
- 以当前质量需求及节约成本目标为中心，分析、学习、测试、实施并改进生产流程，以降低报废、减少人员等；

- Responsible for introduce new process from lead plant and apply to local plant;
- 负责从领导工厂引进最新的生产工艺并运用到本工厂；

- Participate in Failure parts and customer complaints analysis, and take effective action to solving problems with process correlative topic;
- 参与缺陷件与客户投诉的分析，并采取有效的措施解决与工艺相关的问题；

- Train and instruct the adjuster to adjust parameters and make maintenance for the key machine;
- 培训和指导调整工进行关键工艺设备的参数调整和日常维护；

- Support to prepare for sample manufacturing;
- 协助准备生产样件；

- Participate in the new project plan, and provide valuable planning on personnel, workplace and logistics;
- 参与新项目规划，并在人员、场地和物流等方面提出合理的规划；

- Processing project topics and other tasks assigned by supervisor.
- 处理项目的相关议题以及主管分配的其他工作任务。

任职要求：
- Bachelor degree or above with engineering, mechanical, industry engineering related major;
- 本科及以上学历，工程、机械及工业工程等相关专业；

- Three years above working experience in automotive industry with assembly line or machining line engineering process. Have experience regarding leading team to complete the new product launch or production line transfer;
- 3年以上汽车行业装配线或机械加工生产线工艺方面的工作经验，有领导团队完成新产品投产或产品线转移的经验；

- Master the lean production tools such as pull and leveling, problem solving, quick change over, lean line design;
- 掌握精益生产工具，比如拉动和均衡生产、问题解决、快速换型和精益生产线设计；

- Clear quality control mindset and quality tools master like (APQP, PPAP, FMEA , , SPC and MSA;)
- 清晰地质量控制意识和掌握质量工具的运用,，如APQP PPAP,、 FMEA ,、 SPC 和 MSA；

- Excellent communication, execution and coordination skills;
- 卓越的沟通、执行和协调能力；

- Good command of English in reading, writing, listening and speaking.
- 良好的英语听、说、读、写能力。

部门：人事部|人数：10人|专业：|地点：长沙经济技术开发区东五路75号 (邮编：410006)|浏览：466
投递简历

岗位职责：
- 负责根据图纸要求完成精加工、装配、调试工作；

- 负责对工装进行修配；

- 负责对装配过程出现的问题进行解决；

- 提供在客户现场的售后服务；

- 服从领导安排的临时工作任务。

任职要求：
- 机械制造、模具中专及以上学历；

- 35岁以下，3年以上工装、模具调试经验；

- 良好的机械识图能力；

- 动手实践能力强，现场经验丰富；

- 有基本的液压/气动知识；

- 能够熟练使用相关测量仪器；

- 良好的学习能力和团队意识；

- 能读懂英语图纸。

部门：人事部|人数：10人|专业：|地点：长沙经济技术开发区东五路75号 (邮编：410006)|浏览：428
投递简历

岗位职责：
- 负责按照设备安全操作规程，按照图纸要求独立完成零件机加工作；

- 负责机加工零部件自检工作；

- 负责对机加设备的维护和保养工作；

- 负责对部分机加件的备制；

- 负责机加现场的5S；

- 按时完成领导安排的工作任务。

任职要求：

- 机加相关专业中专以上学历；

- 三年以上相关工作经验；

- 持有相关职能技能证书优先。

部门：人事部|人数：10人|专业：|地点：长沙经济技术开发区东五路75号 (邮编：410006)|浏览：431
投递简历

岗位职责：
- Take in charge for mechanical and electrical maintenance for the whole equipment;
- 负责所有设备的机电维修及预防性维护；

- Timely checking the situation of equipment;
- 定时检查设备运行状况；

- Be familiar with the guideline manual and capability of the equipment;
- 熟悉MSE设备使用说明书及设备工作能力；

- Provide the specification of spare parts, fill in maintenance record;
- 提供备件型号参数，填写维修记录；

- Instruct the operator to perform autonomous maintenance;
- 指导操作员的自主维护工作；

- Follow the work arrangement from the direct supervisor.
- 服从主管安排的其他工作。

任职要求：
- Junior college graduated, electrical major;
- 电气相关专业大专以上学历；

- Above 3 years’ maintenance work experience;
- 三年以上维修工作经历；

- Electrical knowledge background, electrical technology, PLC.
- 电工基础，电子技术，PLC知识。